Blocks PRO 30 Manual De Mantenimiento página 27

01
Change Nuzzel
01.3 Replace nozzle
1.3.1. Preheat PLA.
(See page 36, task 4.1 Preheat PLA)
Attention: Nozzle at this time is at 180ºC.
6mm
1.3.2. Using a spanner, place it in the nozzle.
1.3.3. Insert the 20mm spanner into the heating head.
1.3.4. Fixing the 20mm spanner, turn the
nozzle.
1.3.5. Replace the nozzle.
1.3.6. Fixing the 20mm spanner, turn the
Attention: Leave a margin of 1 to 2mm between the nozzle and the heating head.
1.3.7. Connect the plugs.
Attention: When connecting the plugs, pay attention to the polarity.
1.3.8. Fit the cap.;
1.3.9. Screw the cap.
6mm
spanner counterclockwise to unscrew the
6mm spanner clockwise to screw the nozzle.
MANUAL DE MANUTENÇÃO
PRO 30 27