EN
Sebra Bed Rail, Junior & Grow
YOUR CHILD NEEDS SLEEP TO DEVELOP AND GROW. THE BED RAIL HELPS ENSURE A GOOD NIGHT'S SLEEP FOR BOTH YOU AND YOUR CHILD. THE SEBRA BED RAIL HAS BEEN
DESIGNED FOR THE SEBRA BED, JUNIOR & GROW, A BED THAT GROWS AND EVOLVES WITH YOUR CHILD.
THE BED RAIL IS ECO-LABELLED WITH THE EU FLOWER AND FSC™-CERTIFIED (LICENCE NO: FSC™ C160110). LET THE BED RAIL FOLLOW THE BED, SO THEY CAN BE PASSED ON
TOGETHER – FROM CHILD TO CHILD, FROM FAMILY TO FAMILY.
WE HOPE YOUR FAMILY WILL ENJOY THE SEBRA BED RAIL FOR MANY YEARS, AND THAT YOU WILL TAKE GOOD CARE OF IT SO THAT MORE CHILDREN CAN USE IT.
MIA DELA
FOUNDER OF SEBRA
ABOUT THE DESIGN
SEBRA BED RAIL, JUNIOR & GROW IS DESIGNED BY SEBRA.
THE BED RAIL CAN BE USED FOR THE SEBRA BED, JUNIOR & GROW AND IS EASILY IN-
STALLED ON THE SIDE OF THE BED TO REDUCE THE RISK OF AN ACTIVE BUT SLEEP-
ING CHILD FALLING OUT OF BED. THIS CREATES SECURITY FOR BOTH YOU AND YOUR
CHILD AND MAKES THE TRANSITION FROM A BABY/JUNIOR BED TO A NEW, LARGER BED
EASIER.
THE SEBRA BED RAIL WAS DESIGNED FOR INDOOR USE.
THE SEBRA BED RAIL DOES NOT FIT THE SEBRA BED, BABY & JR.
WEIGHT OF THE BED RAIL: 2.8 KG.
PRODUCT PARTS AND ASSEMBLY
THIS PRODUCT CONTAINS SMALL PARTS THAT MUST BE KEPT AWAY FROM SMALL
CHILDREN. IF POSSIBLE, SAVE THE PACKAGING IF THE PRODUCT WILL BE STORED AT
A LATER DATE. WHEN DISPOSING OF PACKAGING, YOU SHOULD COMPLY WITH LOCAL
REGULATIONS.
CHECK THE CONTENTS OF THE PACKAGE BEFORE THE PRODUCT IS ASSEMBLED. A
COMPLETE LIST OF PRODUCT PARTS CAN BE FOUND ON PAGE 22. IN THE UNLIKELY
EVENT THAT SOMETHING IS MISSING, PLEASE CONTACT THE DISTRIBUTOR WHO SOLD
YOU THE PRODUCT.
THIS PRODUCT TAKES APPROX. 15 MINS. TO ASSEMBLE AND INSTALL. IT TAKES 1
PERSON TO ASSEMBLE AND INSTALL THE PRODUCT. A PHILLIPS SCREWDRIVER IS RE-
QUIRED TO ASSEMBLE AND INSTALL THE PRODUCT – THIS IS NOT INCLUDED. DO NOT
USE AN ELECTRIC DRILL/SCREWDRIVER, AS IT MAY DAMAGE OR SCRATCH THE PROD-
UCT.
FOLLOW THE ASSEMBLY INSTRUCTIONS AND GET AN OVERVIEW BEFORE STARTING AS-
SEMBLY. THE BED RAIL IS PLACED ON THE SIDE OF THE SEBRA BED, JUNIOR & GROW.
THE POSSIBLE POSITIONS OF THE BED RAIL ON THE SEBRA BED, JUNIOR & GROW ARE
SHOWN ON PAGE 22. IF NEEDED, A BED RAIL CAN EASILY BE INSTALLED ON BOTH SIDES
OF THE SEBRA BED, JUNIOR & GROW.
MATERIALS
SEE PAGE 23 FOR AN OVERVIEW OF COMPONENT PARTS.
THE BED RAIL HAS NOT BEEN TREATED WITH, AND DOES NOT CONTAIN, BIOCIDAL
PRODUCTS FOR DISINFECTING PURPOSES.
ALTHOUGH THE PAINTED/VARNISHED SURFACE IS VERY ROBUST, IT CANNOT BE AVOID-
ED THAT MINOR MARKS, SCRATCHES AND/OR PEELING MAY OCCUR ON THE SURFACE
WITH DAILY USE OVER TIME. MARKS AND MINOR SCRATCHES CAN BE REPAIRED WITH
TOUCH-UP PAINT. PLEASE NOTE THAT IT IS NOT POSSIBLE TO ACHIEVE THE SAME SUR-
FACE FINISH WITH TOUCH-UP PAINT AS WITH THE ORIGINAL SURFACE.
MAINTENANCE GUIDE – CLEANING AND CARE
ALL PRODUCTS ARE AFFECTED BY SUNLIGHT – EVEN THE MOST COLOURFUL AND
COLOURFAST PRODUCTS CAN FADE. YOU SHOULD THEREFORE KEEP THE PRODUCT
AWAY FROM DIRECT SUNLIGHT. WOOD IS A STURDY AND LIVING NATURAL MATERIAL.
THE STRUCTURE AND COLOURS WILL CHANGE OVER THE LIFE OF THE PRODUCT DUE
TO THE WOOD'S CONTINUOUS TRANSFORMATION PROCESS. WOOD ADAPTS TO ITS
SURROUNDINGS, SO AVOID PLACING THE PRODUCT IN A ROOM WITH FLUCTUATING
HUMIDITY, AND ALWAYS PROTECT THE PRODUCT FROM STRONG HEAT SOURCES SUCH
AS RADIATORS, FIREPLACES, ETC. AS THESE COULD AFFECT OR, IN THE WORST CASE,
DRY OUT THE WOOD. EXPOSURE TO DRAMATIC TEMPERATURE VARIATIONS OR HIGH
HUMIDITY CAN ALSO DAMAGE THE PRODUCT, AND IT SHOULD THEREFORE BE USED
AND STORED WITH THIS IN MIND.
THE PRODUCT IS CLEANED WITH A CLOTH SOAKED IN WARM, SOAPY WATER. ALWAYS
USE A SOFT CLOTH TO AVOID SCRATCHES, AND ALWAYS GIVE THE BED A FINAL WIPE
4
WITH A SLIGHTLY DAMP CLOTH. NEVER USE ABRASIVE CLEANERS, ALCOHOL-BASED
AGENTS, BLEACHES OR SHARP OBJECTS WHEN CLEANING.
SPARE PARTS
SEBRA OFFERS SPARE PARTS FOR THE SEBRA BED RAIL. IF PARTS ARE FOUND TO BE
DEFECTIVE AFTER NORMAL PRIVATE USE, SPARE PARTS WILL BE MADE AVAILABLE FREE
OF CHARGE UPON PRESENTATION OF A VALID RECEIPT FOR A PERIOD OF 5 YEARS
FROM THE DATE OF PURCHASE. IF THE PARTS ARE DAMAGED BY MISUSE OR ARE LOST,
SPARE PARTS CAN BE PURCHASED. READ MORE ABOUT HOW AND WHERE YOU CAN BUY
SPARE PARTS AT WWW.SEBRA.DK
PRODUCT WARRANTY TERMS AND CONDITIONS
SEBRA PROVIDES AN EXTENDED PRODUCT WARRANTY ON THE SEBRA BED RAIL FOR A
PERIOD OF 5 YEARS FROM THE DATE OF PURCHASE. THE WARRANTY COVERS BREAK-
AGE OF COMPONENTS AND DAMAGE DURING NORMAL PRIVATE USE, CAUSED BY DE-
FECTIVE WORKMANSHIP. WE EMPHASISE THAT NATURAL VARIATIONS IN THE WOOD
CANNOT BE CONSIDERED AS ERRORS OR DEFECTS, AND SEBRA THEREFORE DOES NOT
GUARANTEE COLOURFASTNESS OR MATCHING OF SURFACE COLOURS OR HARDNESS,
GRAINS OR TEXTURES.
IF A COMPLAINT IS JUSTIFIED AND FALLS UNDER THE MENTIONED GUARANTEES, SE-
BRA WILL REPAIR, REPLACE OR REFUND THE PRODUCT IN QUESTION, DEPENDING ON
THE SPECIFIC CASE. SEBRA ALONE WILL DECIDE WHAT TYPE OF REMEDIAL ACTION
WILL BE TAKEN. A CODE NUMBER (FOUND AT THE BOTTOM OF THE BED RAIL), A BATCH
NUMBER (FOUND ON THE BACK OF THE ASSEMBLY INSTRUCTIONS) AND A PURCHASE
INVOICE ARE REQUIRED WHEN SUBMITTING A WARRANTY CLAIM. READ MORE ABOUT
THE PRODUCT GUARANTEE AT WWW.SEBRA.DK
THE WARRANTY IS VOIDED BY
•
THE PRODUCT SHOWING VISIBLE TRACES OF WEAR
•
SIGNS OF MISUSE
•
SIGNS OF MISSING/INCORRECT MAINTENANCE ACCORDING TO THE MAINTE-
NANCE GUIDE
•
THE PRODUCT HAVING SUFFERED DAMAGE, INCORRECT ASSEMBLY, IMPROPER
OPERATION, IMPROPER USE OR STORAGE, ETC.
•
THE USE OF THIRD-PARTY MATERIALS ON THE PRODUCT OR CHANGES TO THE
PRODUCT, E.G. NEW PAINT OR VARNISH
DISPOSAL OF THE PRODUCT – RECYCLING AND DISASSEMBLY.
THE SEBRA BED RAIL WAS DESIGNED TO BE HANDED DOWN. SO, PASS ON THE BED
RAIL ALONG WITH THE SEBRA BED, JUNIOR & GROW. IF THIS IS NOT AN OPTION, WE
RECOMMEND THAT YOU TRY TO RESELL IT, E.G. VIA A RESALE PLATFORM. IF, FOR ANY
REASON, THE BED RAIL HAS REACHED A STATE WHERE IT CAN NO LONGER SERVE AS
A SAFE BED RAIL, YOU SHOULD DISMANTLE IT FOR SORTING AND DISPOSAL. LOOS-
EN THE VARIOUS SCREWS USING A PHILLIPS SCREWDRIVER BY TURNING COUNTER-
CLOCKWISE TO SEPARATE THE DIFFERENT PARTS.
SORT AND DISPOSE OF THE PARTS AS FOLLOWS:
•
METAL CAN BE HANDED IN AT AN APPROPRIATE RECYCLING FACILITY AND RE-
CYCLED.
•
PAINTED/VARNISHED WOOD AND METAL CAN BE DELIVERED TO A RECYCLING
FACILITY FOR APPROPRIATE DISPOSAL.
