Idiomas disponibles
Idiomas disponibles
CALIBRO 6 dicembre 2017 15 lingue_Layout 1 06/12/17 17:38 Pagina 19
Reclining the seat
Note: The seat can only be reclined in
group 1. It can be used in the upright
position, the reclined position and in
one of the intermediate positions.
Note: The seat must always be used in
the upright position in groups 2 and 3.
7. To recline the seat, pull the recline
adjustment handle and at the same
time move the seat forwards or
backwards until the required recline
position
releasing the handle in the required
position, push the car seat until a click
is heard. Always check that the car seat
is locked in the chosen position.
How to secure the child in the car
seat
8. Securing the child with the insert
fitted. For the child's safety: use the
if it is
insert for children weighing less than
but not
15 kg. The insert guarantees the
s a 2-
correct
he lap
smaller children. Always secure the
cars).
child in the car seat using the safety
s, the
harness. Do not rest the car seat on
of the
raised surfaces (table, changing table)
when the child is seated in the car seat.
Position the car seat so that the ends
above
of the harness cannot be damaged by
re that
being shut in the car doors, by the
on the
adjustment of the seats, etc.
Securing the child using the 5-point
arness:
car seat harness
same
9. Press the adjuster and at the same
safety
time pull both of the car seat safety
rapped
straps. Do not pull the pads wrapped
around the straps.
10. Press the red button on the buckle
justed
to open it.
11. Move the straps so they rest on the
sitions
sides of the car seat. Sit your child in
d when
the seat.
e been
12. Bring the tongues together and
insert them into the buckle. A click is
adrest,
heard indicating the harness has been
of the
fastened correctly.
13. Adjust the height of the harness
rest so
straps so they are just above the
tected;
child's shoulders. Make sure the straps
h the
rest perfectly on the child's shoulders.
14. Pull the adjuster strap towards you
is
reached.
Note:
support
and
comfort
INSTRUCTIONS FOR USE
to ensure the harness fits the child
snugly. Tighten the harness, make sure
it is not twisted.
How to tighten the straps.
15.
Pull
towards you to make the safety
harness fit your child snugly. Do not
pull the strap upwards or downwards.
Do not leave the end of the adjuster
strap so that it is free or hanging
down: always secure it to the car seat
after
fabric. Checks to be made to ensure
that your child is always fitted securely
in the car seat. For your child's safety:
Always check that your child is
strapped in properly and secured
firmly by the car seat harness. Always
check that the straps are adjusted
properly in height and length. Check
that the straps are not twisted.
16. Always check that the tongues are
fastened properly in the buckle.
for
How to fit the car seat in the vehicle.
For the protection of all the occupants
of the car:
In the event of an accident or a sudden
emergency stop, anyone who is not
wearing a seat belt or items that are
not securely fastened, may injure the
other occupants of the car. Always
check:
- that the backrests of the seats are
locked in position (for example, check
that the rear folding seats are securely
in position).
- that heavy or pointed items or other
items in the car (for example, any
items
in
the
secured firmly in place.
- that all the occupants of the car are
wearing seat belts.
- that the child car seat is secured to
the seat even when it is not in use,
using the car seat belts or with the
Isofix and top tether system.
Do not place anything between the
child car seat and the seat.
Installation for group 1 (9-18 kg.)
with the Isofix and Top tether
system
Find the two Isofix anchorage points
the
adjuster
strap
compartments)
are
18
