Battery Power - Roadstar HRA-1245 Manual De Instrucciones

LOCATION OF CONTROLS
1. FUNCTION SELECTOR
2. SPEAKERS
3. VOLUME KNOB
4. DIAL SCALE
5. TUNING KNOB
6. FM ANTENNA
7. BATTERY COMPARTMENT
8. AC POWER SOCKET
CONNECTING TO POWER
This unit operates from a main supply of 230V ~ 50Hz. Connect the AC power
cord to the AC household main outlet. Ensure that the voltage is as indicated
on the rating plate on the rear of the unit.
 Turn VOLUME KNOB (3) clockwise to switch the unit ON.
 Turn the volume down completely using VOLUME KNOB (3) to switch the
unit OFF.
Note: When no sound is produced, the unit will switch OFF automatically
after 15 minutes. To resume playback, switch the unit OFF and then switch it
ON again.

BATTERY POWER

Insert 6 x AA size batteries into the BATTERY COMPARTMENT (7). Be sure
that the batteries are inserted correctly to avoid damage to the appliance. Al-
ways remove the batteries when appliance will not be used for a long period of
time, as this will cause leakage to the batteries and subsequently damage to
your set.
FM/MW RADIO OPERATIONS
1. Select FM/AM mode using FUNCTION SELECTOR (1).
2. Turn TUNING KNOB (5) to select your favourite radio station.
3. Turn the VOLUME KNOB (3) to the desired volume level.
Note: For FM reception there is a built in telescopic antenna. You may
need to adjust the position of the antenna to get optimum reception.
SPECIFICATIONS
AC:
Batteries:
FM:
MW:
Specifications and the design are subject to possible modifications without noti-
ce due to improvement.
English
230V ~ 50Hz
6 x AA
87.5 - 108 MHz
530 - 1620 kHz
2