AVS Bugflector Manual De Instrucciones página 2

Installation Steps
LOOSELY attach hood shield to HOOD.
Apply masking tape to areas BEHIND mounting flanges.
3
Apply (1) coat of surface prep in front of masking tape,
where tape is present on hood shield. Allow surface
5
Remove remainder of tape by pulling on free ends.
7
Apply (4) bump ons to surface of hood.
9
NOTE: Actual application may vary slightly from illustrations.
prep to dry.
After masking tape has been applied to hood, carefully
4
Align hood deflector with front edge of hood. Once positioned cor-
rectly, pull tape liners. Press firmly to adhere exposed tape.
6
Apply FIRM pressure to all tape flanges to ensure proper adhesion.
8
Page 2 of 3
remove hood shield.
Remove masking tape.