Installation Steps - AVS Bugflector Instrucciones De Instalación

Installation Steps

1
Remove (6) screws from supports
with 10mm socket.
3
Carefully remove grille from hood and set aside.
5
Remove tape liner from hood shield.
7
NOTE: Actual application may vary slightly from illustrations.
Open Hood.
Remove (2) christmas tree fasteners
2
Remove (6) retaining nuts from upper
4
Clean leading edge of hood with
6
Center part on front edge of hood and
secure using exposed tape.
8
7
Page 2 of 4
from rubber trim.
backside of grille.
alcohol pad.