Installation Steps; Care And Cleaning - AVS Ventvisor 92024 Instrucciones De Instalación

Installation Steps

Align the driver side visor with the previously cleaned
3
NOTE: The bottom edge of tape flange should be
aligned with edge of window opening.
With the visor in its final position, remove the remaining
tape liner by pulling on free ends.
5

Care and Cleaning

• Wash only with mild soap & dry with a clean cloth.
Congratulations!
You have purchased one of the many quality Auto Ventshade™ branded products offered by Lund International,
Inc. We take the utmost pride in our products and want you to enjoy years of satisfaction from your investment.
We have made every effort to ensure that your product is top quality in terms of fit, durability, finish and ease of
installation.
™ Auto Ventshade
NOTE: Actual application may vary slightly from illustrations.
surface.
Lund International, Ventshade Accessories Division
655 Raco Drive, Lawrenceville, GA 30045
800-241-7219 • Fax 770-339-5839 • Visit us at lundinternational.com
© 2005 Lund International, Inc. All rights reserved.
, the Auto Ventshade logo and the AVS
TM TM
Press the exposed area of tape against the surface and
verify position. Open the door to ensure the visor does not
4
Press along visor flanges to ensure proper adhesion.
6
Repeat Steps 1 - 6 for passenger side visor
logo are trademarks of Lund International, Inc.
TM
Page 2 of 2
obstruct door opening.