GB
Unpacking
Installation
WARNING!
The appliance is heavy. Always handle with at least two persons.
►
Keep all packaging materials out of children's reach and dispose them in an envi-
►
ronmentally friendly manner.
Take the appliance out of the packaging.
►
Remove all packaging materials.
►
Environmental conditions
The room temperature should always be between 10° C and 43° C, since it can influence
the temperature inside the appliance and its energy consumption. Do not install the
appliance near other heat-emitting appliances (ovens, refrigerators) without isolation.
Space requirement
Required space when door is opened:
W1=1076 mm
W2=1360 mm
D1=628 mm
D2=1064mm
Ventilaton cross-section
To achieve sufficient ventilation of the appliance for safety
reasons, the information of the required ventilation
cross sections must be observed.
Aigning the appliance
The appliance should be placed on a flat and solid surface.
1. Tilt the refrigerator slightly backwards.
2. Set the feet to the desired level.
Make sure the distance to the wall on the hinge side is at
least 10 cm for the door to open properly.
Notice:
For a free standing appliance: this refrigerating appliance is not intended to be used as a
built-in appliance
Installation
35