LEGRAND C2G C2G41604 Manual De Instrucciones página 9

4-Port HDMI Switch - 4K 60Hz
API Command Set Continued
No. Description
Command:
SET SW in<CR><LF>
Return:
SW in<CR><LF>
Parameter:
in = {in1, in2, in3,
Switch Input for
3
in4,next,prev}; // next
Output
connect source；
previous connect source
Description:
SW is short for Switch.
Switch one input source
for one output sink.
Command:
GET MP<CR><LF>
Return:
Mp in<CR><LF>
Get which input
Parameter:
4 mapping to the
in = {in1, in2, in3, in4};
indicate Output
Description:
MP is short for mapping.
Get which input map-
ping to the indicate
Output.
Command Example
Command:
SET SW
in1<CR><LF>
Return:
SW in1<CR><LF>
Description:
Switch in1 for out
Command:
GET
MP<CR><LF>
Return:
MP in1<CR><LF>
Description:
Get which input
mapping to out
No. Description
Command:
GET INPUT_C
prm1<CR><LF>
Return:
INPUT_C prm1
prm2<CR>
Parameter:
Get input connect
prm1 = {in1, in2,...,
5 status in a certain
in4}
input
prm2 = {connect,
disconnect}
Description:
Get input connect
status in a certain
input. INPUT_C is
short for Input connect.
7
(us)
Command Example
Command:
GET INPUT_C
in1<CR><LF>
Return:
INPUT_C in1
connect<CR>
Description:
in1 connected