Idiomas disponibles
Idiomas disponibles
Care and Cleaning
Prior to cleaning, first turn off and unplug the system from the power source.
□
To clean the fixture, use a dry or slightly dampened, clean cloth to wipe the exterior of the fixture. Allow the
□
fixture to dry completely before connecting to power and operating.
IMPORTANT: : : : Do not use solvents to clean fixture.
Troubleshooting
Problem
Problem
Problem
Problem
The fixture(s) will not turn
□
on.
The fixture(s) is flashing.
□
Possible Cause
Possible Cause
Possible Cause
Possible Cause
The power is turned
□
off.
The cables are not
□
properly connected.
Too many fixtures
□
have been linked
together and the
15W power supply
has been overloaded.
7
Solution
Solution
Solution
Solution
Ensure there is power going to the outlet
□
Ensure all cables are properly connected
□
Ensure that the total wattage of linked
□
fixtures does not exceed the single power
supply 15W limit. If so, reconfigure
according to the guidelines detailed in
"Pre-Installation". (Additional power
supply units may be required.)
Please contact 1-877-527-0313 for further assistance.
HOMEDEPOT.COM
