Idiomas disponibles
Idiomas disponibles
Installation instructions
• Avoid falls and collisions.
• Never attempt to immerse the product in liquid.
• Do not use abrasive products or solvents to clean
the casing. Its surface may be cleaned using a
soft, dry cloth.
• Do not attempt to open the casing.
• Do not install the RF receiver where persons
wearing a pacemaker may be present.
• All use or modification of the equipment not an-
ticipated by Johnson Controls-Hitachi Air Condi-
tioning Spain, S.A.U. could lead to danger in us-
ing it.
• Use only the cables and accessories supplied.
N O T E
?
• Avoid positioning the receiver against or close to
any metallic part in order to avoid any radio trans-
mission drop.
• Place the product in a detachable manner close
to the device to be controlled. The product should
be installed at a height of less than 1.5m high.
• Do not install the RF receiver where devices us-
ing radio frequencies as means of transmission
are prohibited (Refer to local standards in effect).
• Do not install the RF receiver close to devices
that may be affected by radio waves.
• Do not install the RF receiver in a damp environ-
ment (for example, a bathroom).
2
PMML0502 rev.1 - 01/2021
