Defrosting; Replacing The Light Bulb; Replacing Led Lighting; Transportation And Changing Of Installation Position - NEW POL MY395X Manual De Instrucciones

Defrosting

• Defrosting occurs automatically in the refrigerator compartment during operation; the
water is collected by the evaporation tray and evaporates automatically.
• The evaporation tray and the water drain hole should be cleaned periodically with the
defrost drain plug to prevent the water from collecting at the bottom of the refrigerator
instead of flowing out.
• You can also clean the drain hole by pouring ½ glass of water down it.

Replacing the Light Bulb

To replace the bulb in freezer and fridge departments;
1. Unplug your fridge.
2. Remove the cover of the box from the claws using
a screwdriver.
3. Replace with a bulb of maximum 15 Watts.
4. Install the cover.
5. Wait for 5 minutes before re-plugging and bring the
thermostat to its original position.

Replacing LED Lighting

If your refrigerator has LED lighting contact the
help desk as this should be changed by authorized
personnel only.
TRANSPORTATION AND CHANGING OF INSTALLA-
PART. 4
TION POSITION
• The original packages and foamed polystyrene (PS) can be retained if required.
• During transportation, the appliance should be secured with a wide string or a strong
rope. The instructions written on the corrugated box must be followed while transporting.
• Before transporting or changing the installation
position, all the moving objects (ie,shelves,crisper...)
should be taken out or fixed with bands in order to
prevent them from getting damaged.
Carry your fridge in the upright position.
EN - 33 -