HP D2835A Manual Del Usuario página 12

HP Ultra VGA 1280 User's Guide
Using Your Display
Your display has a Plug and Play capability (VESA DDC1/2B standard)
that enables it to identify itself to suitably equipped HP Vectra PCs.
This will automatically give you the best refresh rate for the resolution
that you have set.
Minimizing Eye Strain
To avoid screen flicker and minimize eye strain, use the highest
supported image refresh rate for the chosen resolution. It is
recommended that you use a refresh rate of 85 Hz. The image refresh
rate is the number of times per second that the image is refreshed.
To find out which image refresh rates are supported by your display,
refer to "What Video Modes are Supported" on page 9. To set the image
refresh rate (also known as the vertical frequency), refer to the
manual that came with your PC or your operating system
documentation, if necessary. If your PC supports Plug and Play, it will
automatically select the best refresh rate for the screen resolution you
have set.
Minimizing Energy Consumption
If your PC supports VESA display power management (available on
many HP Vectra PCs), you can minimize the power consumed by the
display. There are two power saving modes:
1
Standby mode (uses less than 15 W). In this mode, the display's
•
front panel indicator light is amber/green blinking.
2
Sleep mode (uses less than 5 W). In this mode, the display's front
•
panel indicator light is amber blinking.
To set these power saving modes, refer to the manual that came with
your PC. If your screen is not displaying an image, check the front
panel indicator light first — your display may be in a power saving
mode.
1. Standby mode is activated when vertical sync is cut by the video controller.
2. Sleep mode is activated when both vertical and horizontal sync are cut by the video
controller.
8 English