Idiomas disponibles
Idiomas disponibles
ENGLISH
TROUBLESHOOTING
Minor problems often can be fixed without calling
customer service.
PROBLEM
Motor does not run
Suction capacity
decreases
Vacuum stops
running
Dust comes out
while vacuuming
SOLUTION
Check power cord, plugs and outlet.
Ensure the on/off switch is in the
ON position (I).
Remove blockages in the suction
nozzle, suction tube, suction hose
or filters.
Replace the paper or fleece dust bag.
Check for proper installation of the
filters.
Clean or replace the filters.
Empty the dust tank, refer to
the tank
under
Operating
instructions.
Thermal overload has been tripped:
1. Turn the vacuum off and
disconnect vacuum cleaner from
power source.
2. Empty the canister, if needed.
3. Allow the unit to cool.
4. Plug the power cord into an
appropriate outlet and turn on/off
switch to the ON position (I) to
test. If vacuum will not restart
call 1-888-899-0146.
Check for proper installation of the
filters.
Ensure filters are not damaged;
replace if necessary.
Ensure filter seals are in place and
are secure.
Empty
8
