SEVERIN KS 9889 Instrucciones De Uso página 9

Ocultar thumbs Ver también para KS 9889:
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 27
GB
Temperature-controlled wine cabinet
Dear Customer,
Before using the appliance, read the following instructions
carefully and keep this manual for future reference. The
appliance must only be used by persons familiar with these
instructions.
Connection to the mains supply
The appliance should only be connected to an earthed
safety socket installed in accordance with the regulations.
Make sure that the supply voltage corresponds with the
voltage marked on the rating label. This product complies
with all binding CE labelling directives.
∙ Do not operate this unit by means of a transformer or,
together with other electrical appliances, by means of an
extension cable.
∙ To prevent noise vibration, ensure that the power cord
does not touch any part of the rear of the unit (e.g. the
heat-exchanger).
General information
This appliance is a compressor refrigerator designed for
cooling and storing wine only.
∙ Refrigeration appliances are classified into certain
climate classes. Please refer to the product data sheet
for information on the classification for this unit.
∙ No responsibility is accepted if damage results from
improper use, or if these instructions are not complied
with.
Important safety instructions
∙ This appliance is intended for
domestic or similar applications, such
as
- in staff kitchens in shops, offices and
similar working environments,
- in agricultural working environments,
- by customers in hotels, motels etc.
and similar accommodation,
- in bed-and breakfast type
environments.
∙ This appliance is not intended for
commercial use, nor for use in the
catering business or similar wholesale
environments.
The cooling circuit in this
appliance contains the
refrigerant isobutane
(R600a), a natural gas
with a high level of environmental
compatibility, which is nevertheless
flammable. Ensure, therefore, that
none of the components of the
refrigerant circuit become damaged
during transportation and installation
of the appliance. If damage to the
cooling circuit does occur, do not
switch on or connect the appliance to
the mains power. If there should be
an open flame or any other source of
ignition in the vicinity of the refrigerant
gas, make sure it is removed
immediately from the area and that the
room is then thoroughly ventilated.
∙ Warning: Keep ventilation openings,
in the appliance enclosure or in a
built-in structure, clear of obstruction.
Sufficient ventilation must be ensured
at all times.
∙ Warning: Do not damage the cooling
circuit. Any escaping refrigerant
causes damage to the eyes; there
is also a danger of the refrigerant
igniting.
∙ Warning: Do not use any external
device (e.g. a heater or heating fan)
to accelerate de-frosting; follow only
the methods recommended in this
manual.
∙ Warning: Do not operate any other
electrical appliance, such as an ice-
maker, inside the cabinet, unless it is
specifically mentioned in this manual.
9
loading