Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
10. Locate the Left and Right Doors (N). Install four
Hinges (GG) to the Left and Right Doors (N). by
screwing eight Hinge Screws (HH) through the
Hinges (GG) and into the Left and Right Doors
(N).
11. Line up the hinge cups on the Left and Right
Doors (N) with the hinge plates in the Lower
Left and Right Side Panels (E). Slide the
hinge plates over the hinge cups as shown
and tighten them with the screws provided on
the hinge plates. Adjust the vertical height by
loosening the four "A" screws, in the diagram,
on both hinges. Two of them are usually in
slotted holds which allows you to adjust up or
down by a few mm. Then tighten the screws
again. Adjust the depth by loosening "B" screw,
in the diagram, and adjust the door. If the
door cannot be adjusted, please loosen screw
"C", as shown in the diagram, then try again.
Tighten screw "B" and "C" as shown in the
diagram. Adjust the cabinet doors sideways by
turning the screw "C" on both hinges on each
door.
12. Attach the Handles (KK) to Left and Right
Doors (N) by inserting one Bolt (KK) through
the hole in the door. Tighten the Bolt (KK) with a
screwdriver.
10
11
A
HH
C
12
7
HH
GG
N
X2
B
KK
