Wesco WS4509K Manual Del Usuario página 16

Idiomas disponibles

Idiomas disponibles

SYMBOLS
WARNING-To reduce the risk of injury, user
must read instruction manual
Double insulation
Warning
Wear ear protection
Wear eye protection
Wear dust mask
16
OPERATING
INSTRUCTIONS
NOTE: Before using the tool, read the
instruction book carefully.
1. INSTALLING THE FRONT HANDLE (SEE
FIG. A1, A2)
For your personal safety we recommend using the front
handle at all time.
Align the holes on the both sides of the front handle with the
holes on the both sides of the machine. Tighten the screw
with hex key clockwise. Tighten fully.
WARNING:
Make sure the protrude on the handle
locked in the groove of the machine to fix the
handle.
2. PLACE THE BONNET AND POLISHING
FOAM PAD (SEE FIG. B1, B2)
Place the required bonnet or polishing foam pad securely
over the velcro pad and make sure it's centrosymmetric,
otherwise the polisher vibrates badly.
3. SPREAD THE POLISH (SEE FIG. C)
Spread about a tablespoonful of polish evenly over the entire
surface of the bonnet . Do not apply polish directly to car.
This first application should do about 1/3 of an average
size car. For the second and third applications of polish,
repeat as above. The bonnet will not adsorb as much when
reloading.
4. ON/OFF SWITCH (SEE FIG. D)
Your switch is locked off to prevent accidental starting. Push
the lock-off button then the on/off switch, release the on/
off switch. Your switch is now locked on for continuous use.
To switch off your tool just depress and release the on/off
switch.
5. VARIABLE SPEED CONTROL (SEE FIG. E)
The speed increases as you turn the switch towards the
higher number and decreases on the lower number.
6. HAND GRIP AREAS (SEE FIG. F)
Always hold your car polisher firmly with both hands when
operating.
7. SPINDLE LOCK BUTTON (SEE FIG. G)
Press in the spindle lock button and rotate the velcro pad by
hand until it is locked.
EN
loading

Este manual también es adecuado para:

Ws4509kuPbp1803Pbp1803u