Idiomas disponibles
Idiomas disponibles
Safety
Gas connection
WARNING: The connection
of the hob to the gas network
or gas cylinder must be
made by means of a rigid
copper or steel pipe with
fittings complying with local
regulations. These fittings are
NOT supplied.
THIS OPERATION MUST
BE MADE BY A QUALIFIED
GAS INSTALLER.
• A connecting elbow is
pre-fitted to the hob.
This elbow terminates
in an external 1/2" BSP
connecting thread complying
with ISO 228-1:2003. The
connection made to the pre-
fitted elbow MUST be suitable
for connecting to this thread. If
ANY other connection type or
thread size is used a suitable
adaptor MUST be fitted.
• The qualified gas installer must
ensure that the operation
of the burners has been
correctly verified before use.
CAUTION: The gas connection
must be installed in compliance
with applicable regulations in
the country of installation.
Gas supply requirements
• The appliance installation
must be carried out in
accordance with relevant
local regulations.
• The installation must be
carried out by an authorised
gas appliance installer and
tested to local regulations.
• We are not legally able to
offer advice on the installation
of gas appliances to un-
authorised personnel.
Ventilation
• This appliance must not be
connected to a combustion
products evacuation device.
It shall be connected and
installed in accordance with
local installation regulations
paying particular attention
to the relevant requirements
regarding ventilation.
06
