hillvert HT-LS-8000 Manual De Instrucciones página 37

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 148
assembly with the locking pin (B) and the spring pin (A). Follow the same steps to install the other control
lever and cover assembly on the other side.
Check both sides after assembly. The control levers must be placed in the slots of the connection
brackets.
3.3.4.
Adjustable log holder
Align the holes and install the fastener 1 and the fastener 2 on the clamps. Pay attention to the orientation
of the fasteners as shown in the picture below. Secure the connection with M6x16 bolts, washers and nuts.
Secure the log clamps on the arms with star knobs and flat washers.
loading

Este manual también es adecuado para:

Ht-ls-7000h