h)
Before switching the unit on, remove any regulating tools or keys. A tool or wrench left in a moving part
of the unit may cause injury.
i)
The product is not a toy. Children should be watched to ensure that they do not play with the product.
j)
Do not place your hands or any objects inside the running device!
2.4.
Safe use of the device
a)
Do not overload the device. Use tools that are suitable for the application. A correctly selected product
will do a better and safer job for which it was designed.
b)
Disconnect the device from the power supply before adjusting, cleaning, or servicing. This precaution
reduces the risk of accidental start-up.
c)
Keep unused product out of the reach of children and anyone unfamiliar with the device or this manual.
Products are dangerous when used by inexperienced users. Locking the workshop/room where the unit
is stored is recommended.
d)
Keep the product in good working order. Check before each use for general damage or damage to
moving parts (cracks in parts and components or any other condition that may affect the safe operation
of the device). If damaged, return the device for repair before use.
e)
Keep the product out of the reach of children.
f)
Repairs and maintenance should be carried out by qualified personnel using only original spare parts.
This will ensure the safety of use.
g)
To ensure the designed operational integrity of the device, do not remove factory-installed covers or
loosen screws.
h)
When transporting or moving the device from storage to the place of use, observe the health and safety
rules for manual handling applicable in the country where the device is used.
i)
Avoid situations in which the device stops under heavy loads during operation. This can cause
overheating of the drive elements and consequent damage to the equipment.
j)
Do not touch any moving parts or accessories unless the device is unplugged.
k)
Do not move, shift, or rotate the device while in operation.
l)
Do not leave the device switched on unattended.
m) Clean the device regularly to prevent permanent dirt build-up.
n)
The provided value of vibration emission is measured according to the standard measurement methods.
The value of vibration emission may change if the unit is used under different environmental conditions.
o)
The product is not a toy. Cleaning and maintenance must not be performed by children without adult
supervision.
p)
Do not tamper with the device to alter its performance or design.
q)
Keep the unit away from sources of fire and heat.
r)
The unit should not be placed above shoulder height!
s)
Do not use the unit on uneven, slippery, wet, muddy, or icy surfaces or in tall grass.
t)
Use the unit when the weather conditions are favorable. Good lighting is essential when working with
the unit.
u)
The use of protective gloves made of electrically non-conductive material, non-slip footwear and safety
glasses is recommended.
v)
Do not stand on the unit or store objects on it.
w)
There should be no other tools in or around the splitting area. Reaching for them, especially by a third
party, can result in accidental injury.
x)
When using the unit, stay fully focused and constantly monitor its operation.
y)
Keep body parts away from moving parts and from the engine, which can become hot.
z)
Do not forcefully cut through logs that are too large or have nails, cables, or other parts. Doing so may
cause unpredictable operation of the unit or damage to it.
aa) The unit is designed for use by one person.
bb) Do not apply mechanical pressure to the unit. Do not tap or strike the unit to remove a blocked log.
cc) Check oil level regularly and perform oil changes.
dd) Do not place the log while the wedge is moving, it must be stopped (raised).
ee) Working with one log at a time is recommended.