VENTE-UNIQUE SPARUS Guia De Instalacion página 4

Receive Your Bathtub
A) Unpack and check for damage
After receiving your bathtub, please unpack and remove all covering, checking whether there is any damage.
Repack the bathtub if it is not being immediately installed. It will be rejected any claim for damage if not
notified in a timely manner.
B) Protect your Bathtub
Before commencing installation, ensure the bathtub is completely protected, leave covering in place until the
bathroom is complete. Scratches and cracks incurred during installation are not covered by the warranty.
Cleaning & Maintenance
A) To preserve the polished surface, after using your bathtub, clean with soft cloth and warm soapy water to
wash away any body oils or soap residue that forms a ring tide mark.
B) Do not use powders, pastes, crème cleaners, thinners, window cleaning sprays or dry clean liquid, etc.
C) When coloured essentials oils are used, first test that the colour won't stain your bathtub. Always add oils
into a bathtub full of water. Never pour them into an empty bathtub.
No.
A
B
C
D
E
Fastener washer
Adjustable feet
F
Make sure the reinforcement in the tap holes are solid before installing the faucet
Tap Holes Drilling Attention if applicable
* Pay attention to below points if the bathtub is designed with tap deck.
* The tap holes are not pre-drilled on the deck, drill holes according to your need.
* Check and silicone the tap holes to make sure they are solid after drilling.
* Check and make sure that there is no water leakage at the faucet.
Illustrations below are for reference only
Part Name
Bar
Screw
Nut
Washer
TOOLS REQUIRED
ACCESSORIES
Qty (pcs)
4
4
12 (8 pcs pre-assembled on bath)
12 (8 pcs pre-assembled on bath)
4
4
Picture
Adjustable Wrench
3