Idiomas disponibles
Idiomas disponibles
CONSULT YOUR PHYSICIAN IF YOU FEEL VARIATION IN YOUR PRESSURE RESULT. THE
USE OF THIS PRODUCT DOES NOT DISPENSE THE MEDICAL ADVICE.
DO NOT USE THE PRODUCT FOR INVASIVE MEASUREMENT
Introduction
Blood pressure measurements determined by MG-20 are equivalent to those obtained by a trained
observer-using cuff/stethoscope auscultation method, within the limits prescribed by the American
National Standard, Electronic or Automated Sphygmomanometers. MG-20 is to be used by adults
only for personal use.
Attention: Please read this manual carefully before use. For specific information on your
own blood pressure, contact your physician. Please be sure to keep this manual.
How MG-20 works
Techline´s MG-20 uses oscillometric method to detect your blood pressure. Before the cuff starts
inflating, the device will establish a baseline cuff pressure equivalent to the air pressure. Your
MG-20 unit will determine the appropriate inflation level based on one's pressure oscillations,
followed by cuff deflation. During the deflation, the device will detect the amplitude and slope of the
pressure oscillations and thereby determine the systolic pressure, diastolic pressure, and pulse for
you.
About Blood Pressure
What is Blood Pressure?
Blood pressure is the pressure exerted on the artery tube while blood flows through the arteries.
The pressure measured when the heart contracts and sends blood out of the heart is systolic
(highest). The pressure measured when the heart dilates with blood flowing back into the heart is
called diastolic (lowest) blood pressure.
B
LOOD
DIGITAL SEMI-AUTOMATIC UPPER ARM
Instruction Manual
P
M
RESSURE
ONITOR
MG-20
10
Características:
P Semi-Automatic
P Easy-to-read Display
P 60 Automatic Memories
P Beeping Reminder
(Inglês)
