Tristar WK-3213 Manual De Usuario página 4

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 15
Instruction manual
OPeRATION AND MAINTeNANCe
• Remove all packaging of the device.
• Check if the voltage of the appliance corresponds to the main voltage
of your home.
• Rated voltage : AC220-240V 50Hz. Place the device on a flat stable
surface and ensure a minimum of 10 cm. free space around the device.
This device is not suitable for installation in a cabinet or for outside use.
USe
• The kettle should be used exclusively for boiling water; never use it
with other liquids or ingredients. Before the first use boil a full pot of
water to clean the pot and discard this water.
• You can open the lid by pressing the button (no. 1).
• Always fill the pot between the minimum and maximum level markers.
• If insufficient water is used, the kettle will switch off, with too much
water it may boil over.
• To boil water push down the On/Off button (no. 3). The indicator lamp
will be illuminated.
• Once the water has boiled, switch off the On/Off button immediately.
• If the appliance is accidentally switched on when no water is in, the
boil-dry protection will automatically switch it off. Adding water will
then cool the boil-dry protection mechanism which enable you to use
the kettle as normal.
Note:
• Do not pickup the jug kettle until it has switched off automatically or
you have switched it off yourself first.
• The steam from the device is very hot, avoid any contact, you may
seriously burn yourself.
4
• Do not fill the kettle higher than the MAX level indicator or boiling
water may spray out.
• Never open the lid when the jug kettle is on.
• The cord should be completely unrolled and not left rolled around the
base.
CleANING
• Remove the plug from the outlet.
• Allow the unit to cool completely before cleaning.
• The outside of the kettle can be wiped with a damp cloth. Never use
metal polish.
• Never immerse the kettle and base in water or other liquid.
DeCAlING
• Use a decaling product which is suitable for household appliances.
• Follow the instructions on the packaging. Rinse the kettle several times
with clean water after decaling.
loading