SPEX SLWZ-DIM-01 Manual Del Usuario página 5

1. Disconnect and remove the
existing switch.
2. Connect the Smart Dimmer as
per the below wiring diagram.
The ground wires must be
connected to the electrical box.
3. Mount the Smart Dimmer in the existing gang box with the
provided screws and attach the wall plate (press fi t).
4. Turn on the power at the circuit breaker.
5. Test to see that the Smart Dimmer is functioning by pressing
the ON/OFF switch. Your load (lights) should turn ON/OFF
respectively.
Note: If your lights do not turn on, your live and load wires
might be incorrectly connected. Turn off power at the circuit
breaker and try swapping them.
6. WiZ app setup
Refer to "WiZ Quick Setup Guide"
Neutral
(Required)
Live (Required)
Load
Ground