Maintenance; Maintenance Plan; Cleaning The Air Filter; Cleaning The Spark Plug - Zipper ZI-GPS70G Manual De Instrucciones

14

MAINTENANCE

No cleaning, upkeep, checks or maintenance when machine is running
Be safe: Shut off the machine, let it cool down, disconnect spark plug cap from
spark plug.
The machine does not require intense maintenance. However, to ensure a long lifespan, we
strongly recommend following the upkeep and maintenance plan.
Repairs must be carried out by specialists! Use original ZIPPER parts only!
14.1

Maintenance plan

Controls for the maintenance of the machine
Loose or lost screws, nuts, bolts
Damage of any part of the machine
Machine cleaning
Cleaning spark plug
Cleaning air filter

14.1.1 Cleaning the air filter

A clogged air filter reduces the engines power output drastically and causes engine disfunction.
Furthermore it reduces the engines lifespan!
Loosen the nut 22 and remove the cover of the air filter 23 (Fig. O). Take out the air filter (Fig.
P) and clean the air filter (Fig. Q) with water. Wring it out strongly. Let it dry. Drip some drops of
oil onto the filter. Mount the filter back and fix the cover again.

14.1.2 Cleaning the spark plug

Take off the spark plug cap 26 (Fig. S). Loosen and remove the spark plug 27 (Fig. T) carefully.
Clean it with a small brush from soot debris.
The contact distance shall account approx. 0, 5mm or ~ credit card thickness.

14.1.3 Tensioning the chain (Fig. R)

Adjust the chain tension that it isn't able to spring out of the guides and that it doesn't sit too
fast.
Turn the adjusting screw 25 clockwise to tension the chain and anti-clockwise to loosen it.

14.1.4 Changing the chain

 Loosen the nut 32 and remove the cover 33 (Fig. Y).
 Loosen the chain.
 Remove the chain.
 At fitting the new chain you have to take care that all the guides slide in the grooves 34 (Fig. Z).
Z.I.P.P.E.R MASCHINEN GmbH  www.Zipper-maschinen.at
Gartenpflegeset / Garden maintenance set ZI-GPS70G / ZI-GPS182G
ATTENTION
Regularly prior to each operation
Regularly prior to each operation
Regularly after operation
Every 25 working hours
Every 20-30 working hours
MAINTENANCE
Seite 50