Cleaning, Maintenance, Storage, Disposal; Cleaning; Maintenance; Maintenance Plan - Zipper ZI-EWB500 Instrucciones De Servicio

14 CLEANING, MAINTENANCE, STORAGE, DISPOSAL

14.1

Cleaning

The usage of certain solutions containing ingredients damaging metal surfaces as well
as the use of scrubbing agents will damage the machine surface!
Clean the machine surface with a wet cloth soaked in a mild solution
Never use running water or a high pressure cleaner to clean the machine.
Clean the outer parts with a damp sponge.
Never clean the electronic parts with water!
Check the machine and remove the deposits and / or residues with a brush.
14.2

Maintenance

Unplug battery before all maintenance and settings!
Serious injury due to unintentional or automatic activation of the machine!
The machine does not require extensive maintenance. If malfunctions and defects occur, let it be serviced
by trained persons only.
Clean your machine regularly after every usage – it prolongs the machines lifespan and is
a pre-requisite for a safe working environment.
Repair jobs shall be performed by respectively trained professionals only!
Check regularly the condition of the security stickers. Replace them if required.
Check regularly the condition of the machine.
Store the machine in a closed, dry location.
14.2.1

Maintenance plan

After each workshift:
Check the cables (tight fit, damage)

14.3 Storage

Clean thoroughly all components before storage.
Store all components separately in a dry area at not less than -10 ° C.
Charge the battery fully before storing.
During longer standstill but at least after one month charge the battery.

14.4 Disposal

Observe the national waste disposal regulations. Never dispose of the machine, ma-
chine components or equipment in residual waste. If necessary, contact your local
authorities for information on the disposal options available.
If you buy a new machine or an equivalent device from your specialist dealer, he is
obliged in certain countries to dispose of your old machine properly.
15

TROUBLESHOOTING

BEFORE YOU START WORKING FOR THE ELIMINATION OF DEFECTS, UNPLUG THE BATTERY.
Trouble
No electrical support
No charging of battery
ZIPPER MASCHINEN GmbH www.zipper-maschinen.at
ZI-EWB500-AKKU
CLEANING, MAINTENANCE, STORAGE, DISPOSAL
NOTICE
CAUTION
NOTICE
NOTICE
Possible cause
Battery is not charged
Motor stucks
Power switch is damaged
Broken or loose cables
Loosen cable
Solution
Recharge battery
Check motor
Check switch
Check cables
Check cable connection
28