Idiomas disponibles
Idiomas disponibles
Cautions!
1. Do not remove the float from the water tank; otherwise, the machine will not stop to work
when the water tank is full. Then the water will be overflow that maybe make damage to your
floor.
1. Drain the water collection tank completely when water tank is full and reset your setting
2. If the water tank is dirty, clean by cool water or warm water, cannot use cleaner, steel wool, chemical
rag duster, gas oil, benzene, thinner or other solvent to clean it, otherwise, it would damage the water
tank and lead to leakage
3. When put the water tank back to the unit, please use two hands to push the water tank into the machine
to the correct position. Or the water full indication will still show red and the machine cannot work.
Continuous drainage
1. Open the cover on the back of the dehumidifier.
2. Take out the water tank
3. Insert a PVC pipe with 9.5mm and 1m length (supplied), put the other side into a container, such as a
bucket.
Step:
1.
At the back
you can find
the hole for the
tube entrance.
-36-
