Idiomas disponibles
Idiomas disponibles
• Remove your device from the power pack's induction charging zone and switch it off by pressing
the Power button twice in quick succession. The LEDs (4) go out.
Note
The power pack can be charged and the inductive charging function used simultaneously. The
Power button (3) is inactive in this situation. The wireless charging function starts automatically
when the smartphone is placed in position.
4.2.2. Charging via the power pack's USB-C output:
• connect the enclosed USB-C charging cable to the USB-C port on the power pack
(OUT 5 V / 2 A, 9 V / 1.5 A, 12 V / 1.1 A) and with the USB-C port on your device (mobile phone,
smartphone, etc.).
• In certain circumstances, the enclosed charging / connecting cable may not match the USB port on
your device. In this case, use the USB cable that came with your device.
• The charging process begins automatically. During the charging process, the LEDs (4) the power
pack's remaining available capacity.
• The current battery charge status of your device is indicated on this.
• Terminate the charging process and switch the power pack off by pressing the power button twice
in quick succession. The status LEDs go out.
• In the event that no device is connected, the power pack switches itself off automatically.
Warning - connecting devices
• Before connecting a device, check whether it can be adequately supplied with the power pack's
current delivery.
• Ensure that the total current consumption of the connected device does not exceed 2000 mA.
• Note the instructions in your device's operating manual.
• You must obey the instructions and safety notes contained therein regarding the supply of
power to your devices.
• Please do not charge simultaneously using the wireless charging and USB-C charging options.
Doing so may in certain circumstances overload the power pack.
Note – optimised charging
Optimised charging means that the power pack recognises the connected device, supplies it with
the ideal current strength and therefore reduces the charging time to a minimum. Note that the
power pack's maximum current delivery is 2000 mA.
5. Care and maintenance
Only clean this product using a lint-free, slightly damp cloth and do not use any harsh cleaners.
6. Warranty disclaimer
Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from
improper installation/mounting, improper use of the product or from failure to observe the operating
instructions and/or safety notes.
4
