KLASS Fan TORNADO LT Manual De Instrucciones página 20

long side of the canopy faces the 2
holes which on the downrod, the long
side of the decorative cover faces the
lower camber groove).
- Insert the downrod into the connector,
fix the downrod to the connector by 2
"R" pin and 2 M8 cross pin, then fix it
by the two nuts with washer (DO NOT
TIGHTEN IT FIRST).
3
- Install the downrod with motor to
the hanger bracket by 2 "R" pin and
two M8 cross pin, then fix it by the 2
nuts with washer (DO NOT TIGHTEN IT
FIRST).
- Do not remove the screw which with
steel cable, pass the steel cable to
the hanger ring, fix the cable into the
screw hole, then fasten the screw.
long side
M8 screws
screw
R pin
nut
washer
hanger ring
steel cable
18
2 holes
M8 screws
downrod
R pin
nut
washer