Idiomas disponibles
Idiomas disponibles
INSTALLATION
CHOOSE A PROPER LOCATION FOR THE CEILING FAN
Choose the perfect spot to place your fan and take all the necessary safety
precautions before beginning the installation.
Once all the precautions are taken, trace your drill holes, using a pencil, through
the bracket by placing it on the ceiling.
WARNING
• Make sure electricity is turned off at the main power box before
starting work. Turn off the power by removing fuse or turning off
circuit breaker before installing the fan and replacing the lamps.
• To ensure a good electrical protection to your fan it is essential to
install a wall switch.
• Make sure that the circuit breaker of the line on which you want to install
your fan is tripped, to avoid damages or danger in case of overvoltage.
• The lowest point on the fan blade must be at least 2.3 m (7.5ft)
from the floor.
• Make sure that ceiling joists are strong enough and of adequate size
to support the weight of the fan in movement.
FAN INSTALLATION INSTRUCTIONS
1
Use 4 expansion Setscrew to install the
hanger bracket firmly.
2
- Remove the 4 "R" pin, 4 M8 cross
pin and 4 nuts with washer from the
downrod.
- Install the canopy and decorative
cover through the downrod, then
thread the wires and steel cable
through the downrod (attention: the
Concrete ceiling
Mounting
plate
Expansion bolts
Canopy
Decorative
cover
17
Wires
Steel cable
Downrod
Motor
