Specific Safety Instructions - stayer TM10BA Manual De Instrucciones

This manual is consistent with the date of manufacture of
your machine, you will find information on the technical
data of the machine acquired manual check for updates
of our machines on the website: www.grupostayer.com
When using equipment, a few safety precautions must
be observed to avoid injuries and damage. Please read
the complete operating manual with due care. Keep this
manual in a safe place, so that the information is available
at all times. If you give the equipment to any other person,
give them these operating instructions as well. We accept
no liability for damage or accidents which arise due to
non-observance of these instructions and the safety
information.
WARNING! For your safety, read this manual
and the safety instructions before using the
machine carefully. Always keep your power
tool with these instructions.
CAUTION: Packaging
toys!Children should not play with plastic
bags!There is a danger of suffocation!
If who fail parts or damaged parts, contact the
vendor.
1. Index

2. Specific safety instructions ........................... 12

3. Click commissioning...................................... 12
3.1 Placement .......................................................... 12
3.2 Montage ............................................................. 12
3.3 Illustrated description ......................................... 13
4.
Operating Instructions
4.1 Placement and Testing....................................... 13
4.2 Changing tools. .................................................. 13
4.3 Adjustment operations ....................................... 13
5. Maintenance and service instructions ........... 13
5.1 Cleaning and maintenance ................................ 13
5.2 Repair Service ................................................... 13
5.3 Warranty ............................................................ 13
5.4 Elimination ......................................................... 14
6. Marked regulatory .......................................... 14
6.1 Technical features .............................................. 14
6.2 EC Declaration of Conformity ............................ 14
2.
Specific safety instructions
- Hold the tool by the insulated handles when carrying
out work during which the plug-in tool could strike
concealed power cables or its own mains lead. Contact
with a live cable will also make the metal parts of the
tool live and will cause an electric shock.
- The drill is not designed for use with attachments.
- Do not use near vapors or inflammable liquids.
- Make sure you have a steady foothold when working
on ladders and platforms.
materials are
...................................... 13
ENGLISH
12
- Prior to drilling in walls where electricity, water or gas
lines are concealed, use a cable/pipe detector to locate
the lines.
Do not lose this safety information.
Denotes risk of personal injury or damage to the tool.
Read manual before
use.
In accordance
with essential
requirements of the
European directive(s).
"Class II - The machine is double insulated;
not
Earthing wire is therefore not necessary
3.
Click commissioning
3.1 Placement
Carefully remove the tool and all loose items from the shi-
pping container.
Keep all packaging materials until after examining the ma-
chine and used successfully.
Before installing, repairing or performing
maintenance work on the machine, always
turn off the operation switch and remove the
plug from the socket!
3.2 Mounting
Before you connect the equipment to the mains supply
make sure that the data on the rating plate are identical to
the mains data.
Always pull the power plug before making adjustments to
the equipment.
Fitting the drill bit (Fig. 2-3)
- Always pull the power plug before making adjustments
to the equipment.
- The quick-change drill chuck (1) is equipped with a
locking fastener:
To lock = press the sleeve (a) forwards
To unlock = press the sleeve (a) backwards
- Open the chuck (1). The drill bit opening must be large
enough to fit the drill bit into.
- Select a suitable drill bit. Push the drill bit as far as
possible into the chuck opening.
- Close the chuck (1). Check that the drill bit is secure in
the chuck (1).
- Check at regular intervals that the drill bit or tool is
secure (pull the mains plug).
12
TABLE SECURITY ICONS
Use protective
gloves.
Use masks,
helmets
and glasses.