Idiomas disponibles
Idiomas disponibles
EN
8.3
OPERATE THE SELF-PROPEL DRIVE
SYSTEM
1.
Start the machine.
2.
While you hold the bail switch (1), turn the
StepSense self-propel button (3) to the unlocked
position to open the self-propel system.
3.
Turn the StepSense self-propel button to the
locked position to close the self-propel system.
To engage the self-propel drive system while the
mower is not running:
• Turn the StepSense self-propel button to the
unlocked position.
8.4
LED HEADLIGHTS
10
1.
Press the start button (2) and pull the bail lever
(1) to turn on the LED headlight (10).
2.
Release the bail lever to turn off the headlight.
8.5
EMPTY THE GRASS CATCHER
1.
Stop the machine.
2.
Remove the safety key.
3.
Remove the battery pack.
4.
Open the rear discharge door and hold it.
5.
Hold the grass catcher by its handle and unhook
it from the door rod.
1
2
3
1
2
3
English
6.
Close the rear discharge door.
7.
Empty the grass catcher.
8.6
OPERATION TIPS
• Do not try to override the operation of the start
button or bail switch.
• Do not tilt the machine when you start it.
• Do not put hands or feet near or below the turning
parts.
• Keep the discharge chute clean.
• Do not cut wet grass.
• Higher blade height is necessary for new or thick
grass.
• Clean the bottom of the mower deck after each
use. Remove grass clippings, leaves, dirt, and other
debris.
9
MAINTENANCE
Remove the safety key and battery pack from the
machine before maintenance.
Keep the motor and battery pack free from grass,
leaves or too much grease.
Use only approved replacement parts.
Do not let brake fluids, gasoline, petroleum-based
materials touch the plastic parts. Chemicals can
cause damage to the plastic, and make the plastic
unserviceable.
Do not use strong solvents or detergents on the
plastic housing or components.
12
WARNING
WARNING
CAUTION
CAUTION
CAUTION
