Idiomas disponibles
Idiomas disponibles
In doing so, observe the regulations and safety instructions cited in these operating instruc-
tions. Use of the cable in any other areas shall be considered improper use. The manufac-
turer shall accept no liability for injuries to persons and/or property damage arising from
this.
2.3 Technical data
Type designation
Voltage
Power
Protection class
Protection type
Length of extension cable
External diameter of heating cable
Screen
Sheathing
Mechanical strength class
of the heating cable per IEC 60800
Smallest permissible bend radius
Minimum installation temperature
2.4 Function
The heating cable has an automatic thermostat, which switches on the
heating cable as soon as a temperature of ca. +3°C is detected, and
switches it off again when a temperature of ca. +12°C is detected.
The heating cable shall not be connected in the summer (unplug).
3. SELECTION OF THE FROST PROTECTION HEATING CABLE
3.1 Selection for gutters and downpipes
Measure the length of the gutters + downpipes. If using double-laying, the required length
of the heating cable is given by doubling the length.
Select the standard length that is closest to the twice the gutter length. The cable shall not
be more than 600 mm shorter than the gutter and shall not be longer than the gutter.
DE
EN
FR
IT
FPC-CT
230 V AC / 50 Hz
20 W/m
I
IPX7
2 metres
Ca. Ø6.0 mm
Aluminium mylar tape with trace wire
Polyolefin, environmentally friendly and UV resistant
M2
Rmin = 35 mm
< +5°C
DA
NL
SV
ES
PL
