Idiomas disponibles
Idiomas disponibles
3.2. Unboxing and installation
•
The contents of the boxes need to be carefully unwrapped from the foam foil.
•
Remove the bags with decorative stones from the burner reservoir and place them away from it.
•
Carefully pull out the glass shield wrapped in cardboard placed on the inside of the device
•
Check the completeness of the elements with the contents list.
•
Make sure that the device nor its elements weren't damaged during the transportation (if they were, notify the
supplier).
•
Place FARO on a flat, paved surface outside of the building, preferably on the place of final installation. Leave
sufficient space on the side of the appliance where control panel is located (minimum 1 m).
•
The decorative stones are to be scattered evenly around the reservoir to completely cover the burner of the
fireplace.
3.3. Wheels installation
1
2
1
3
4
2
1
3
4
2
3
4
90°
90°
Fig 3 – Decorative stones arranged on burner
90°
Fig 4 – Wheels installation
7
Place the fireplace with the door facing upwards.
Protect the unit from scratches before placing it.
Insert the wheel screw through the hole in the bottom
of the unit (1) and secure it with the washer (2) and nut
(3) from the inside. Use wrench (4) to tight the wheel.
Assemble 2 wheels with brakes on the side of the gas-
bottle container door and 2 wheels without brakes on
the opposite side.
