Idiomas disponibles
Idiomas disponibles
FR
ES
PT
IT
Abrasive dust causes moving parts such as the lower guard to jam. Sparks
from abrasive cutting will burn the lower guard, the kerf insert and other plastic
parts.
EL
EN
thereis an increased risk of injury from blade contact.
Unrestrained or moving workpieces could be thrown at high speeds,
causing injury.
Cutting on the pull stroke is likely to cause the saw blade to climb on top of the
workpiece and violently throw the blade assembly towards the operator.
Supporting the workpiece "cross handed" i.e. holding the
workpiece to the right of the saw blade with your left hand or vice versa is very
dangerous.
The proximity of the spinning saw blade to your hand may not
be obvious and you may be seriously injured.
Bent or warped workpieces can twist or shift and may cause binding on the
spinning saw blade while cutting.There should be no nails or foreign objects in
the workpiece.
Small debris or loose pieces of wood or other objects that
contact the revolving blade can be thrown with high speed.
If your hand is placed too close to the saw blade,
