Idiomas disponibles
Idiomas disponibles
14
www.raider.bg
1. General instructions for safe work.
Read all instructions carefully. Failure to follow the instructions below may result in electric
shock, fire, and / or serious injury. Keep these instructions in a safe place.
1.1. Workplace safety.
1.1.1. Keep your workplace clean and well lit. Clutter and insufficient lighting can contribute
to an accident at work.
1.1.2. Do not operate the machine in an environment with an increased risk of explosion,
near flammable liquids, gases or dusty materials. During operation, sparks are emitted in the
machines, which can ignite dusty materials or vapors.
1.1.3. Keep children and bystanders at a safe distance while operating the machine. If your
attention is distracted, you may lose control of the machine.
1.2. Safety when working with electricity.
1.2.1. Under no circumstances may the design of the plug be modified. When working with
zero electrical appliances, do not use plug adapters. The use of original plugs and sockets
reduces the risk of electric shock.
1.2.2. Avoid touching your body to grounded bodies, e.g. pipes, heaters, stoves and
refrigerators. When your body is grounded, the risk of electric shock is higher.
1.2.3. Protect your machine from rain and moisture. Water entering the machine increases
the risk of electric shock.
1.3. Safe way to work.
1.3.1. Be focused, watch your actions carefully and act cautiously and wisely. Do not use the
machine when you are tired or under the influence of drugs, alcohol or narcotics. A moment
of distraction when working with a machine can result in extremely severe injuries.
1.3.2. Wear protective clothing and always wear safety goggles. Wearing personal protective
equipment suitable for the machine used and the activity performed, such as a breathing
mask, strong tightly closed shoes with a stable grip, protective helmet or mufflers (ear
muffs), reduces the risk of an accident at work.
1.3.3. Avoid the risk of accidentally switching on the machine. If you hold your finger on the
trigger when carrying the machine, there is a risk of an accident at work.
1.3.4. Before switching on the machine, make sure that you have removed all auxiliary tools
and wrenches from it. An auxiliary tool forgotten on a rotating link can cause injuries.
1.3.5. Avoid unnatural body positions. Work in a stable body position and maintain balance
at all times. This will allow you to control the machine better and safer if an unexpected
situation arises.
1.3.6. Work with appropriate clothing. Do not work with loose clothing or jewelry. Keep your
hair, clothes and gloves at a safe distance from the rotating parts of the machines. Wide
clothes, jewelry, long hair can be grabbed and carried by rotating units.
1.3.7. If it is possible to use an external aspiration system, make sure it is turned on and
functioning properly. The use of an aspiration system reduces the risks due to dust released
during operation.
1.4. Careful treatment of machines.
1.4.1. Do not overload the machine. Use the machines only for their intended purpose. You
will work better and safer when you use the right machine in the load range specified by the
manufacturer.
1.4.2. Do not use a machine whose circuit breaker is damaged. A machine that cannot be
switched off and on in the manner prescribed by the manufacturer is dangerous and must be
repaired.
1.4.3. Disconnect the plug from the mains before changing the machine settings,
replacing work tools and accessories, and when you will not be using the machine for a long
time. This measure eliminates the risk of inadvertently activating the machine.
1.4.4. Keep machines out of the reach of children. Do not use them by people who are
unfamiliar with how to work with them and have not read these instructions. When in the
hands of inexperienced users, machines can be extremely dangerous.
1.4.5. Maintain your machines carefully. Check that the moving parts function properly, do
