FAFREES Smart EV/Moped F20 Max Manual Del Usuario página 21

Idiomas disponibles

parameter setting interface; or long press the "i" button to save the parameter setting

and return to the personalised setting item selection interface; or long press the "-"

button for more than 2 seconds to cancel the current operation, without saving the

current setting data and return to the personalised setting item selection interface.

(6) Press and hold the "i" button again to save the parameter settings and exit the

personalised settings selection screen.

If no operation is performed within one minute, the instrument

automatically exits the setting state.

1. Battery level setting

VOL is the battery level setting option, it requires 1 to 5 voltage

levels to be entered one by one.

Press the "i" button briefly to change the parameter, take the

first battery value of 36V as an example: "1" in the screen

means the first voltage, "31.5" is the first battery value, press

the "+" / "-" button briefly to change the value, short press the

"i" button to confirm and enter the next section of the power

parameter setting interface; after the 5 power values have

been set, short press the "i" button to confirm and return to

the personalised setting item selection interface.

2. Power assist parameter setting (option)

SCR is the option for setting the boost parameter, press the "i"

button briefly to enter the parameter change status.

(1) Power gear selection

The following assist gears can be selected: 0-3, 1-3, 0-5, 1-5,

0-7, 1-7, 0-9, 1-9.

Press the "+"/"-" button briefly to switch between gears; press

the "i" button briefly to confirm the gear mode and enter the

(2) power ratio value setting option, or press and hold the button

to confirm and return to the personalised setting item selection

screen.

Fig. 6 Battery level

setting interface

Fig. 7 Power gear

selection screen