FAFREES Smart EV/Moped F20 Max Manual Del Usuario página 18

General settings
All settings are to be made with the bicycle stationary.
The general setting procedure is as follows
In the power on state, when the instrument display speed is 0
(1) Press and hold the "+" and "-" buttons at the same time for more than 2 seconds to
enter the general settings selection screen.
(2) Press the "+" / "-" button briefly to switch between the general settings and the i
button briefly to change the parameters.
(3) Press the "+" / "-" button briefly to select the parameter.
(4) Press the "i" button briefly to save the parameter settings and return to the general
settings selection screen.
(5) Press and hold the "i" button to save the parameter settings and exit the general
settings selection screen.
The following options are available in the general settings
selection screen:
1. Single mileage clear setting
tC is the single mileage clear setting option. The parameter
tC-n means no single
mileage clearing, the parameter tC-y means single mileage
clearing.
Press the "i" button briefly to enter the parameter change
state, press the "+"/"-" button
briefly to select the parameter, press the "i " button to save
the parameter setting and
return to the general setting item selection interface.
2. Backlight brightness setting
bL is the backlight brightness setting option, the parameters
bL-1, bL-2 and bL-3 can be set to indicate the backlight
brightness, 1 is the darkest, 2 is the standard brightness
and 3 is the brightest.
Short press the "i" button to change the parameter, short
press the "+"/"-" button to select the parameter, short press
the "i" button to save the parameter setting and return to the
general setting selection interface.
：
EN
：
Fig. 3 Backlight brightness
setting interface
13
Fig. 2 Single mileage
clearing operation
interface