Idiomas disponibles
Idiomas disponibles
- Position the front part of the radiator on the special guides in the part fixed to the wall (1)
- Fix the two safety wires provided, tightening the screws all the way, to the front part of the
machine, passing them through the two top slots of the machine fixed to the wall,
to allow the installation of the hoses to be completed and for all cleaning operations (2)
- Connect the two parts to the plumbing, using the hoses provided (3)
2x
- Connect the wire for the control panel from the control unit to the panel itself, using
the specific connector.
- For models with LED, connect the button to the LED transformer using the dedicated
connector.
INSTALLATION WITH PIPES FROM FLOOR (HORIZONTAL MODELS ONLY)
If the installation requires the system to be connected to a system with pipes coming up from
the floor, proceed as follows:
- Fix the radiator to the wall at the height shown in the installation template
- Place the lockshields inside the shape of the radiator, as
shown in the figure (example with template for right-hand connections)
46
2
L
3
1
C
1
L
C
Position the lockshields
inside the ringed area
