Parkside PVA 20-Li A1 Traduccion Del Manual De Instrucciones Originale página 9

Before use
Charging the battery pack
(see fig. A)
CAUTION!
► Always unplug the appliance before you
remove the battery pack
the battery pack to the high-speed charger
.
■ Never charge the battery pack
temperature is below 10°C or above 40°C.
♦ Insert the battery pack
charger .
♦ Insert the mains plug into the mains socket.
The control LED
♦ The green control LED
charging process is complete and the battery
pack is ready for use.
CAUTION!
♦ If the red control LED
means that the battery pack
heated and cannot be charged.
♦ If the red and green control LEDs
both flash, this means that the battery pack
is defective.
♦ Push the battery pack
Inserting/removing the battery pack
Inserting the battery pack
♦ Click the battery pack
slot .
Removing the battery pack
♦ Press the release button
battery pack .
PVA 20-Li A1
from or connect
if the ambient
into the high-speed
lights up red.
indicates that the
flashes, this
has over-
into the appliance.
into the battery
and remove the
Checking the battery charge level
♦ To check the battery status, press the battery
charge level button
remaining charge will be shown on the battery
display LED
RED/ORANGE/GREEN = maximum charge/
performance
RED/ORANGE = medium charge/performance
RED = low charge – charge the battery
Operation
Switching on/off
Switching on in 1st gear at 1400 rpm
♦ Push the ON/OFF switch
Switching on in 2nd gear at 2100 rpm
♦ Push the ON/OFF switch
Switching off
♦ Reset the ON/OFF switch
Adjusting the fan head
♦ Turn the fan head
There are 8 setting options available for this
purpose.
Carrying handle
♦ Carry the appliance by the carrying handle
Fastening hook
♦ Fold the hook out of the stand
can secure it in a suitable place, such as
attaching a wall hook.
. The status/
as follows:
into position I.
into position II.
into position 0.
to the desired position.
so that you
GB │ IE │
.
5 ■