ANSMANN WILINE 5 Manual página 8

USE
WARNING
It is important that all end-devices to be charged with the wire-
ƒ
less technology are suitable for the Qi protocol.
Note that end-devices that require more than 5W of rated output
ƒ
power will charge slower.
NOTE
LED display
Illuminates blue
Illuminates blue, then off
Flashes blue
Illuminates red
INFORMATION
Protective cases with metallic parts or magnets must be removed
ƒ
when charging.
Do not place any foreign objects between the charger and the
ƒ
end-device (no coins, paper clips, metal objects, door keys, NFC
cards, etc.).
Do not use PC / USB-A output ports or a USB mains adapter with
ƒ
too low a power rating to charge the end-device with the WiLine
5 as this will make the charge process too slow or prevent it.
CARE
Disconnect the device from the mains before cleaning or before
storing for an extended period of time.
Clean the charger only with a dry, soft cloth.
TECHNICAL DATA
1. Input:
2. Output:
3. Max. output power:
4. Max. outside temperature: 0 °C ... 40 °C
Deutsch |
Svenska | Italiano | Nederlands | Suomi | Norsk | Dansk
Charging
Fully charged
Fault detection
Standby
5.0 V DC = 1.5 A
5.0 V DC = 1.0 A
5 W
English | Français | Español | Português