Idiomas disponibles
Idiomas disponibles
unless they have been approved by Polti.
• The appliance must be placed on a stable, flat, heat-resistant
surface when in use. If using the iron rest, make sure to place
it on a stable surface. Do not rest the appliance on soft
surfaces like the ironing board cover. Do not use close to
containers full of water.
• Whenever possible, use the iron with the iron rest (fixed or
removable as provided, or an original replacement).
• Do not rest the iron on its base without the iron rest.
• Do not direct steam towards equipment containing electric
and/or electronic components. Do not direct steam at toxic
substances, acids, solvents, detergents, corrosive substances
or explosive substances. Keep the appliance far from
dangerous substances during use.
• Do not direct the steam jet towards the iron rest and/or
towards the appliance itself.
• Do not direct the steam jet or the iron itself towards people
or animals.
• Do not place the appliance near sources of heat such as
fireplaces, stoves and ovens.
• Do not obstruct the openings and grills on the appliance.
• If ironing whilst sitting down, take care to ensure that the
steam jet is not angled towards your legs.
• Before connecting the appliance to the mains, ensure that the
continuous steam jet button (if present) is not pressed.
• Do not leave the iron unattended when the steam is
activated.
• Do not put the appliance away until it has cooled down.
ELECTRICAL SAFETY WARNINGS
• Plug the appliance into a single grounded socket, making
sure that the socket is part of an electrical system that
complies with applicable laws, with a voltage of between
220-240V and a frequency of 50-60Hz. Do not use multi-
socket outlets.
• Make sure that any extension leads used are certified for use
at 16 A and have an earth connection.
• Always turn the appliance off before unplugging it (if it has a
| 19 |
