Nussbaum SMART LIFT 2.30 SL Manual Del Usuario página 119

Time frame Type of
maintenance
12
1
11
2
10
1 x / 12
9 3
4
8
5
7
6
12
1
11
2
10
365 x / 12
9 3
4
8
5
7
6
12
1
11
2
10
365 x / 12
9 3
4
8
5
7
6
12
1
11
2
10
12 x / 12
9 3
4
8
5
7
6
12
1
11
2
10
1 x / 12
9 3
4
8
5
7
6
12
1
11
2
10
12 x / 12
9 3
4
8
7 5
6
OPI_SMART LIFT 2.30 SL-2.35 SL-2.40 SL_V4.4_DE-EN-FR-ES-IT
Maintenance plan
Lifting arm booms, lifting arm bolts, carrier plate threaded bolts are
to be checked for ease of running. If required, lightly grease with a
multi-purpose grease. Do not over-lubricate.
Check CE-stop for function. Exchange if damaged
The rubber acceptance plate is to be checked for wear and replaced
if necessary.
Lubricate the safety nut lubrication nipple once per month with
multi-purpose grease. This is done through the provided hole in the
lifting rails. For this, the spindle cover (see g) must be removed and
pulled upwards.
Over-lubrication of the safety nut by intensive lubrica-
tion or lubrication with grease or molycote leads to a re-
duction of the effectiveness and the lifting performance
of the lift. This must be avoided. If required, degrease
the lift spindle and slightly oil as described.
Check the tracks and the lift rail equalization parts for wear. After
cleaning, grease with a multi-purpose grease.
MINI-MAX lifting arm
1. Blow out and spray bolts.
Check the rollers for wear.
2. Check the locking
(this is only screwed in light-
ly and is then glued (Loctite).
Screws may not be completely
tightened otherwise the ease
of running of the MINI-MAX
mechanism is no longer guar-
anteed.
3. Clean and spray this frictional
surface. "Penetrating oil" simi-
lar to Top 2000 from Autol
4. Check the safety panel for
damage, exchange
quired.
screws
if re-
Pos.
J
K
O
M
N
P
119