KTM TOURATECH Manual página 35

The plate faces to the right and the opening to the
front.
–
Mount and tighten screw
with the case).
Info
The steps are the same on both sides.
–
Key position 90° to the left to open.
–
Key position upward for locking.
500634-01
Removing the locking cylinder
–
Key position 90° to the left.
–
Pull up the locking device.
–
Remove screw
–
Push engaging plate
–
Remove the locking cylinder.
Guideline
The key must remain in the locking cylinder.
500635-01
Info
The steps are the same on both sides.
5 6
with washer
5 6
with washer and locking plate
bl
into the locking cylinder.
OPTIONAL 7
(included
4
.
15