KTM TOURATECH Manual página 33

6.1 Changing the locking cylinder
CHANGING THE LOCKING CYLINDER 6
Removing the locking cylinder
–
Key position 90° to the left.
–
Pull up the locking lever.
–
Remove screw
–
Push engaging plate
–
Remove the locking cylinder.
Guideline
The key must remain in the locking cylinder.
500632-01
Installing the locking cylinder
–
Grease and mount the O-ring
Long-life grease (
–
Position and insert locking cylinder as shown.
The engaging plate
Engaging plate
500624-01
–
Pull up the locking lever.
–
Position locking plate
der as shown.
The plate faces to the right.
–
Mount and tighten screw
ded).
Info
The locking plates with notch
500625-01
needed for the cover's optional lock installation, see
Section 7
5 6
with washer and locking plate
bl
into the locking cylinder.
bk
(included).
p. 16)
bl
points downward.
bl
engages.
3
(included) on the locking cylin-
5 6
with washer
4
(included) are
3
.
(both inclu-
13