Gima 32924 Manual Del Usuario página 33

33
Erasing data
+
A. Press button to select User 1, 2, or 3.
B. Press M button to enter Memory Mode.
C. Press and hold
data will be erased automatically.
D. To confirm the data in the selected user has been erased,
press M button and no data should appear.
Note: Once deleted, your data can NOT be restored.
STORAGE AND MAINTENANCE
General Use
• Do not in any way twist the cuff.
• Do not press
• Do not drop the product and avoid any strong impacts.
Maintenance
• Use a piece of cloth with water or mild cleansing agent to wipe the device and dry it
immediately with a dry cloth.
• Do not use detergent or any strong chemicals to clean the device.
• Use only a dry cloth to wipe the cuff.
• Do not attempt to disassemble or change any parts of the monitor, including arm cuff,
due to substitution of a component different from that supplied might result in measure-
ment error.
• If any suggestion or service is requested, please consult your service station.
Disinfection
Use a piece of cloth with 75% alcohol to wipe the surface of the cuff for 10 seconds.
Storage
• If the device is not to be used for a long time, please remove the batteries from the
device (leaking of battery acid can cause the device to malfunction).
• Always store the unit in the storage case after use.
• Do not place the device directly under sunlight, in high temperature, or in humid or dusty
places.
• Do not store the device in extremely low (less than –13°F/–25°C) and high (more than
158°F/70°C) temperature, nor in a place its humidity exceeds 93% R.H.
+
and buttons at the same time, the
button if the cuff is not wrapped around your upper arm.
ENGLISH