Headboard Brackets (Not Included) - TEMPUR-PEDIC TEMPUR ERGO Manual Del Propietário

headboard bracket installation guide (optional)
Headboard Brackets are an optional accessory and are not included.
A hex key is included with the accessory kit to complete installation.
STEP 1
a. Align the hole in the bracket to the brass sleeve into which
the leg threads. Hold the bracket in place and screw the leg
into the base until it is snug. DO NOT OVERTIGHTEN. Too
much force may cause the leg to spin freely.
b. Align the tab with the hole in the frame (located towards the
foot of the base) and use a short bolt, washer and wingnut to
secure the bracket. Make sure the bolt is tight.
14
STEP 2
a. Measure the distance between the mounting holes on the
headboard and install the T-Bracket to accommodate the
headboard.
b. To install the T-Bracket, slide the T-Bracket through the end
of the headboard bracket. Align the flat side of the T-Bracket
plate to the mounting holes on the headboard.
c. Secure T-Bracket in place by inserting two short screws
through top of bracket. Use hex key to tighten screws.
STEP 3
Connect your headboard to the
attachment plate using the remaining
long screws or hardware that came
with your headboard. The heads of
the bolts will face outward. Use hex
key to tighten bolts.