Product Specifications; Key To Symbols - Beta 1950BZK Manual De Uso E Instrucciones

OPERATION MANUAL AND INSTRUCTIONS

PRODUCT SPECIFICATIONS

TANK CAPACITY
OPERATING PRESSURE
MAXIMUM TANK PRESSURE
WEIGHT

KEY TO SYMBOLS

1) Filling valve
2) Safety valve
3) Operation button
4) Exhaust nozzle
5) Gauge
6) Tank
INSTRUCTIONS
Air supply connection
- Connect the instrument to the compressed air source.
- Slowly open valve "1" to let air in.
- Feed with clean, condensation-free air until the required pressure is reached and shown on gauge "5";
then close the valve and disconnect the instrument.
USE
- Safely place the tank on the ground, and check that all the valves are closed, including the inlet and
the exhaust valve.
- Check that both the tyre and the rim are clean, free from debris and firmly placed on the ground.
- Remove the valve stem from the wheel (this will result in an improved air flow).
- Lubricate both the tyre beads and the rim flanges with suds or any other approved lubricant.
- Point the exhaust nozzle at the tyre, placing the flange on the rim.
- Check that you are in a balanced position, take the tyre bead seater by the handles and push release
button "3". The air flow will be forcefully released between the rim and the tyre.
- The bead should now be properly positioned.
- Inflate the tyre according to the pressure requirements established by the vehicle manufacturer,
through the inflating valve.
- Place the stem valve back.
- Check that no air is leaking from the wheel.
8
0-18L
3 ÷ 8 bar
16 bar
5.2 Kg
6
1
5
2
EN
3
4