Idiomas disponibles
Idiomas disponibles
WARNING
Electrical Shock Or Personal Injury Hazard
Turn off and unplug vacuum cleaner before performing maintenance to the vacuum
vacuum cleaner suddenly starting.
NOTE: Use replacement bulb number 591007167, see part number detail in
REPLACEMENT PARTS (page 7).
1. Remove motorized nozzle cover as shown in BELT CHANGING AND AGITATOR
CLEANING (page 31-34) section.
2. Remove the light bulb by pulling straight out.
CAUTION
Do not plug in or turn on until the vacuum cleaner is completely reassembled.
CAUTION
Do not use a bulb rated over 9W (13V). During extended use, heat from the bulb could
overheat surrounding plastic parts.
3. To replace the light bulb, carefully insert fully into slot.
4. Reinstall motorized nozzle cover as shown in BELT CHANGING AND AGITATOR
CLEANING (page 31-34) section.
LIGHT BULB CHANGING
Pull out to
left side
Push in
to right
-35-
