Starting Up The Device; Boiling Water; Temperature Regulator In The Boiling Range - Kompernaß KH 1134 Instrucciones De Uso

Hervidor de agua
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

• Do not allow individuals (including children) to
use the appliance whose physical, sensorial or
mental abilities or lack of experience and know-
ledge hinder their safe usage of it if they have
not previously been supervised or instructed in its
correct usage.
• Tell children about the appliance and its potenti-
al dangers so that they do not play with it.

Starting Up the Device

• Before starting up the device, make certain that...
– the device, plug and power cable are in good
working order and...
– all packaging materials have been removed
from the device.
• Fill the device with water up to the MAX mark
and let it come to a full boil once as described in
the next section. Pour out this water.

Boiling Water

Danger! Never place the electrical base
near water – life-threatening danger!
You should only heat as much water as you need
directly. That helps you save electricity, water and
time:
u
• Lift away the kettle
q
• Open the lid
by pressing down on the unlok-
king button
w
.
u
• Hold the kettle
vertically while filling. Only
then will the level indicator
correctly indicate the water volume.
Fill the kettle
u
...
– at least to the MIN mark so that the device does
not overheat,
– no higher than the MAX mark so that no boiling
water spills out.
for filling!
i
on the side
• First close the lid
• then place the kettle
straight on the base
• Set the desired water temperature using the
temperature control
To bring the water to a boil, you must set the
temperature controller
• Now insert the power plug into the power
socket and press the ON/OFF switch
until it snaps in.
• The operating light
now heating up.
MIN
Temperature regulator in the boiling
range
• The devices switches off automatically and the
operating light
is at a full boil.
The ON/OFF switch
In order to keep the water warm after bringing it to
a boil, set the temperature regulator
warm range.
Press the ON/OFF switch
- 21 -
q
...
u
on the base
t
t
.
y
.
y
to the MAX position.
e
r
indicates that the device is
Transition-
range
r
goes out as soon as the water
e
springs out.
y
in the keep
e
down, until it snaps in.
until it sits
down
MAX
Tabla de contenido
loading

Tabla de contenido